RED Event List

From Red Faction Wiki
Revision as of 16:07, 12 February 2022 by Goober (talk | contribs) (→‎Bolt_State)

Template:RF1Editing

This page lists all event scripting objects available in RED. To read more about how the scripting system itself works, see Events.

AI_Actions

Attack

Icon Event E.png

Attack

Used to force AI entities to attack objects.
On Response
Make attacker specified by attacker uid param attack the object the Attack event is linked to.
Off Response
None
Parameters
Attacker uid: Primary, Secondary, Flare. What type of weapon to use.

Drop_Point_Marker

Icon Event E.png

Drop_Point_Marker

This is a special type of Event which doesn’t respond to On or Off messages. This Event is used as a position where AI will drop off objects while in AI_COLLECTING_MODE. This is how Grabber robots can drop their rocks off at a specific location.
On Response
None
Off Response
None
Parameters

Drop_Weapon

Icon Event E.png

Drop_Weapon

On Response
None
Off Response
None
Parameters

Follow_Waypoints

Icon Event E.png

Follow_Waypoints

This event will force all linked objects to follow a specified waypoint list, with a specific following method.
On Response
Begin following the waypoints. An AI will use the closest waypoint as the location to begin the path following.
Off Response
Stop following the current waypoint path.
Parameters
Waypoint List: Name of the waypoint list that the AI should follow.
Always Face Player: If true, the AI will always face the player while following their waypoints
Follow Method: This determines how the AI will behave when the last waypoint node is reached. The choices are:

1. One way: follow the waypoints to the last node and stop.
2. Loop: follow the waypoints to the last node, then return to the start and repeat

3. Ping Pong: follow the waypoints to the last node, then follow the nodes back to the start (repeat).
Run: If ticked, the linked objects will attempt to run rather than walk while following the waypoint list.
Always Face Player: If ticked, the linked objects will always look at the player while following the waypoint list.

Goto

Icon Event E.png

Goto

This Event will make all linked entities travel to the Event location.
On Response
Make linked entities start moving towards Event location.
Off Response
None
Parameters
Run: If ticked, the linked objects will attempt to run rather than walk.
Always Face Player: If ticked, the linked objects will always look at the player while following the path.
Face Player When Finished: If ticked, AI will face the player immediately when they get to the Goto event location.
Override Current Behavior: If ticked, AI will ignore any other pathing until reaching the Goto event location. This includes the AI not chasing the player.

Goto_Player

Icon Event E.png

Goto_Player

This Event will make all linked entities travel to the Player position. The linked entities will continue to pathfind to the Player until they have line-of-sight. When the entities can see the Player, they will return to their default AI.
On Response
Make linked entities start moving towards the Player.
Off Response
None
Parameters
Run: If ticked, the linked objects will attempt to run rather than walk.

Headlamp_State

Icon Event E.png

Headlamp_State

On Response
None
Off Response
None
Parameters

Holster_Player_Weapon

Icon Event E.png

Holster_Player_Weapon

This event will forcefully holster the player's weapon.
On Response
Holster the player weapon.
Off Response
None
Parameters

Holster_Weapon

Icon Event E.png

Holster_Weapon

This event will forcefully holster the weapon of any linked entities.
On Response
Holster the weapons of all linked entities.
Off Response
None
Parameters

Look_At

Icon Event E.png

Look_At

This Event will cause any linked AI to turn and face the Event location.
On Response
Make linked AI look at the Event.
Off Response
None
Parameters

Play_Animation

Icon Event E.png

Play_Animation

This event will cause a linked AI to play a specific animation. If the animation is a state animation (i.e., a looping animation) then it will replace the current animation state for the AI. If the animation is an action animation (i.e., a one-time animation) then it is blended with the current state.
On Response
Play the animation.
Off Response
None
Parameters
Animation: Name of the animation. This is selectable from a list of possible animations for the object that is linked.
Hold Last Frame: If true, the model will stay in the last frame of animation. This is only valid if the animation is defined as an action animation.

Set_AI_Mode

Icon Event E.png

Set_AI_Mode

On Response
None
Off Response
None
Parameters

Set_Friendliness

Icon Event E.png

Set_Friendliness

This Event will set the Friendliness of all linked objects.
On Response
Change the Friendliness of an entity.
Off Response
None
Parameters

Friendliness: The friendliness is selectable from a drop-down list, and consists of the following choices:

1. Unfriendly: AI will attack the player on sight.
2. Neutral: AI will only attack the player if provoked.
3. Friendly: AI will not attack the player, and may attack entities that are attacking the player.

4. Outcast: AI will attack anything it sees.

Shoot_At

Icon Event E.png

Shoot_At

This Event will cause all linked AI to shoot at the Event location. The AI will continue to shoot at the Event until an Off message is received.
On Response
Make all linked AI attack the Event location.
Off Response
Make all linked AI stop attacking the Event location.
Parameters

Shoot_Once

Icon Event E.png

Shoot_Once

This Event will make all linked AI shoot once in the direction they are currently facing.
On Response
Fire a single time.
Off Response
None
Parameters
Shoot Type: Primary, Secondary, Flare. What type of weapon to use.

Catalysts

Cyclic_Timer

Icon Event E.png

Cyclic_Timer

This Event will send an On message to all linked Events at a specified interval. This Event has to receive an On Message before it will begin sending out messages.
On Response
Begin sending On messages at the specified interval.
Off Response
None
Parameters
Time: The interval in seconds between sending On messages to all linked Events
Max Sends: The number of times the Event will send out On messages
Send Forever: If true, the Max Sends field is ignored, and the Cyclic Timer sends On messages forever

Delay

Icon Event E.png

Delay

Forwards a response it receives to all linked events after the specified delay duration.
On Response
Send (forward) an on response to all linked events following the delay duration.
Off Response
Send (forward) an off response to all linked events following the delay duration.
Parameters

Invert

Icon Event L.png

Invert

This Event will change On messages to Off messages (and Off to On) before forwarding them to any linked Events.
On Response
Change message to Off.
Off Response
Change message to On.
Parameters

Switch

Icon Event C.png

Switch

This Event behaves like a switch that remembers it’s state (on or off). This Event can be used to turn lights on or off, and can be used to let the player activate special events. If the Event is linked to a VFX, this VFX is used as the model for the switch (the default state of the VFX should be off, with the animation taking the VFX to the on state).
On Response
Toggle the state of the switch. The behavior of the switch is controlled through the Event parameters.
Off Response
None
Parameters
Initial State: The initial state of the switch (either on or off)
Behavior: This says what kind of signal the switch will send. (toggle between on and off, always send an on, always send an off)
Sound: Disk filename (including the .wav extension) of the sound to play when the switch is thrown
Max Throws: How many times the switch can be thrown
Infinite Throws: If true, the Max Throws parameter is ignored, and the switch can be thrown an infinite number of times.

When_Armor_Reaches

Icon Event E.png

When_Armor_Reaches

On Response
None
Off Response
None
Parameters

When_Countdown_Over

Icon Event E.png

When_Countdown_Over

On Response
None
Off Response
None
Parameters

When_Countdown_Reaches

Icon Event E.png

When_Countdown_Reaches

On Response
None
Off Response
None
Parameters

When_Cutscene_Over

Icon Event E.png

When_Cutscene_Over

On Response
None
Off Response
None
Parameters

When_Dead

Icon Event E.png

When_Dead

This Event will send an On message to all linked Events when all linked objects have died. This Event is used when you want to do something when a specific object has been destroyed. Note that savegame files can store only 20 When_Dead events in a given level, so if you're mapping for single player, it's highly recommended to include no more than 20 When_Dead events in a single map.
On Response
None
Off Response
None
Parameters
Activate When Any Dead: Modifies the default behaviour of the event such that it sends an On message each time a linked object dies, rather than the default behaviour of only sending a single On message when all linked objects have been destroyed.

When_Enter_Vehicle

Icon Event E.png

When_Enter_Vehicle

On Response
None
Off Response
None
Parameters

When_Hit

Icon Event E.png

When_Hit

On Response
None
Off Response
None
Parameters

When_Life_Reaches

Icon Event E.png

When_Life_Reaches

This event sends an On message to all linked events when the object to which the When_Life_Reaches event is linked reaches the specified amount of life, either by being healed or by suffering damage.
On Response
None
Off Response
None
Parameters
Life: Specify amount of life (integer) at which the event will activate (send an On message).

When_Try_Exit_Vehicle

Icon Event E.png

When_Try_Exit_Vehicle

On Response
None
Off Response
None
Parameters

Level

Alarm

Icon Event E.png

Alarm

On Response
None
Off Response
None
Parameters

Alarm_Siren

Icon Event E.png

Alarm_Siren

On Response
None
Off Response
None
Parameters

Cutscene

Icon Event E.png

Cutscene

This event is used to activate an in-game cutscene. This event is very powerful, but also very complicated, with loads of options configured in the event properties. Please refer to the cutscene tutorials on the RF1 Editing Main Page for information on how to use cutscenes.
On Response
Play the cutscene.
Off Response
None
Parameters
Many - please see tutorials linked in Description above.

Enable_Navpoint

Icon Event E.png

Enable_Navpoint

This event toggles the active state of all linked Nav Points.
On Response
Enables all linked Nav Points.
Off Response
Disables all linked Nav Points.
Parameters

Endgame

Icon Event E.png

Endgame

This event triggers an endgame sequence, and displays text from endgame.tbl. The Script Name parameter of the Endgame event is used to specify which entry from endgame.tbl is displayed to the player as an on response from this event.
On Response
End the game, and display scrolling text from endgame.tbl that corresponds to the Script Name of this event.
Off Response
None
Parameters

Explode

Icon Event E.png

Explode

This Event will cause an explosion to occur at the Event location. The explosion can be made to cause a geomod, and you can control the amount of damage caused by the explosion.
On Response
Make the explosion happen.
Off Response
None
Parameters
Damage: The amount of damage caused by the explosion. This is the damage that is applied to any object within the explosion range.
Type: Small, Medium, Large. This field isn’t properly supported yet. We need to list a selection of different explosions to choose from.
Geomod: If true, the explosion will apply a geomod at the center of the explosion. The hardness of the rock where the explosion occurs is used to determine if a geomod is possible.

Goal_Check

Icon Event E.png

Goal_Check

This Event can either block or forward On messages, depending on the state of an associated goal_set Event.
On Response
Foward On messages if min_count exceeds the current count value of the associated goal_set Event
Off Response
None
Parameters
Goal to Check: Script name for the associated Goal_Create Event
Minimum Count: The miniumum value that the associated goal variable must have before forwarding messages

Goal_Create

Icon Event E.png

Goal_Create

This event will create a goal variable (integer) when it receives an On message. The variable name will be the script name of the Goal_Create event.
On Response
Create a goal variable.
Off Response
None
Parameters
Start Count: The inital value of the goal variable (this will be zero in most cases).
Persistent: If ticked, the goal variable will be available to be set/checked in future levels, and will be saved in savegame files perpetually. Note that there is a maximum of 64 persistent goal variables that may be saved in savegame files.

Goal_Set

Icon Event E.png

Goal_Set

This Event will increment a goal variable every time it receives an On message (Off messages will cause the count value to decrement).
On Response
Increment count by one.
Off Response
Decrement count by one.
Parameters
Goal to Set: The goal variable name to set.

Item_Pickup_State

Icon Event E.png

Item_Pickup_State

This event is used to toggle the active state of linked Items (ie. whether they can be picked up). The default behaviour of Items is enabled (they can be picked up).
On Response
Set all linked items to enabled (they can be picked up).
Off Response
Set all linked items to disabled (they cannot be picked up).
Parameters

Load_Level

Icon Event E.png

Load_Level

This Event will cause the specified level to load. The Player will be taken to the new level seamlessly. Note that a level cannot have two Load_Level events with the same Script Name, so you should change the Script Name for each Load_Level event you place to something that makes sense to you.
On Response
Load the specified level.
Off Response
None
Parameters
Filename: Disk filename (including the .rfl or .d4l extension) of the level to load.
Hard Level Break: Force the player to the Player Start position in the destination level, rather than the default behaviour of attempting a seamless transition.

Message

Icon Event E.png

Message

This Event will make a sound file play and display the associated text on the Player HUD.
On Response
Play the message.
Off Response
None
Parameters
Persona: Selectable from drop-down list of names which is generated from personas.tbl. Select "none" if you don’t want the message to be from a persona.
Voice Filename: Disk filename (including .wav extension) of the sound file to play.

Monitor_State

Icon Event E.png

Monitor_State

This event is used for initializing and configuring security monitors and mirrors.
On Response
Set all screen clutter objects this event is linked to to cycle between video feeds from all camera entities this event is linked to, according to the parameters configured in the event properties.
Off Response
None
Parameters
Initial State: Control whether the linked monitors should be on or off as a result of this event's on response.
Cycle Delay: Time, in seconds, that linked monitors display a given video feed. If this parameter is set to 1.0 for example, the feed will cycle to the next linked camera every 1 second.
Continuously update monitor: If ticked, monitor will constantly be updated. Severe performance impact, but is needed for video feeds of dynamic scenes.

Music_Start

Icon Event E.png

Music_Start

Plays a specified music track.
On Response
Start playing the music track specified in the event's properties.
Off Response
None
Parameters
Filename: Filename (.wav) of the music track to play.
Use Effects Volume: If ticked, the music track volume is scaled using the Sound Effects volume slider, rather than the Music slider.

Music_Stop

Icon Event E.png

Music_Stop

This event stops all music currently being played.
On Response
Stop playing all music tracks (after fading them out according to this event's properties).
Off Response
None
Parameters
Fade Time: Length of time any currently playing music tracks will take to fade out to silence. (if set to 0, music will immediately stop playing)

Play_Sound

Icon Event E.png

Play_Sound

This Event will cause a sound to play. The sound can be a 3D or 2D sound, and it can be made to loop.
On Response
Start playing the sound.
Off Response
Stop the sound, if it is playing.
Parameters
Sound Filename: Disk filename of the sound to play (including .wav extension).
Min Distance: Distance (in meters) where the sound begins to drop off in volume. If you don’t want the sound to be 3D, set the Min Distance to zero.
Looping: If true, the sound will play looping (until you stop it by sending an Off message to this Event).

Play_Vclip

Icon Event E.png

Play_Vclip

On Response
None
Off Response
None
Parameters

Remove_Object

Icon Event E.png

Remove_Object

This Event will destroy all objects linked to the event. Objects will disappear instantly (i.e., without their death sequence).
On Response
Kill all linked objects immediately.
Off Response
None
Parameters

Slay_Object

Icon Event E.png

Slay_Object

This Event will kill all linked objects, and allow their death sequence to play.
On Response
Kill all linked objects.
Off Response
None
Parameters

Spawn_Object

Icon Event E.png

Spawn_Object

This Event will cause a specific object type to be created. The object is created at the Event location, with an identity matrix orientation.
On Response
Spawn the object at the Event location.
Off Response
None
Parameters
Object Type: Entity, Clutter, Item. Selectable from a drop-down list.
Object Class: The classname of the object. Selectable from a drop-down list. The choice here depends on the Object Type that has been selected.

Swap_Textures

Icon Event E.png

Swap_Textures

This Event will cause the specified textures (up to 2 per Event) to be used on all linked objects.
On Response
Swap the textures.
Off Response
None
Parameters
Texture Num: Texture index to swap (starts from 0)
Texture Filename: Disk filename (including extension) of the texture bitmap to use

Modifiers

Armor

Icon Event E.png

Armor

This event adds or subtracts from the armor of all linked objects.
On Response
Apply the Armor Delta specified in this event's properties to all linked objects.
Off Response
None
Parameters
Armor Delta: Modification to perform to armor. Negative values subtract armor, positive values add armor.
Apply to player: If ticked, apply the Armor Delta to the player as the On response, rather than applying it to linked objects.

Black_Out_Player

Icon Event E.png

Black_Out_Player

Fade the player's camera out to, or in from, full black.
On Response
Linearly fade the player's camera to full black over the time specified in the event properties.
Off Response
Immediately set the player's camera to full black and then linearly fade in to full visibility over the time specified in the event properties.
Parameters
Blackout Time: Specify the time over which the blackout occurs.
Kill Player After Blackout: If ticked, the player will be killed after the Blackout Time has elapsed.
End Level After Blackout: If ticked, the level will end after the Blackout Time has elapsed, with a scrolling endgame message pulled from endgame.tbl. The Script Name for the Black_Out_Player event is used to specify the endgame.tbl entry that is displayed.

Bolt_State

Icon Event E.png

Bolt_State

This event is used to toggle the active state of linked bolt emitters. The default state for bolt emitters is controlled by the "Emitter is initially on" flag in the emitter properties.
On Response
Set all linked bolt emitters to active/enabled.
Off Response
Set all linked bolt emitters to inactive/disabled.
Parameters

Clear_Endgame_If_Killed

Icon Event E.png

Clear_Endgame_If_Killed

This event is used to allow entities which would ordinarily trigger an endgame sequence when killed, to be killed without triggering that sequence.
On Response
Remove the "End Game If Killed" flag from all linked entities.
Off Response
None
Parameters

Continuous_Damage

Icon Event E.png

Continuous_Damage

Cause the AI or Player which triggered the event to receive damage (use a trigger reset time of 0 to make the damage continuous).
On Response
Apply damage to the entity who triggered the event. Any linked objects will also receive damage.
Off Response
None
Parameters
Damage Per Sec: Damage per second applied. (0 is instant death)
Damage Type: melee, bullet, armor piercing bullet, explosive, fire, energy, electrical, acid, scalding.

Detach

Icon Event E.png

Detach

This event controls whether linked objects (normally entities) are attached to movers they intersect (like cranes, elevators, etc.)
On Response
Detach linked objects from moving groups they intersect.
Off Response
Attach linked objects to moving groups they intersect.
Parameters

Fog_State

Icon Event E.png

Fog_State

This event is used to toggle the active state of the level's distance-based fog (fog uses the settings configured in Level Properties, and the default behaviour is for fog to be enabled).
On Response
Set fog to enabled/active.
Off Response
Set fog to disabled/inactive.
Parameters

Force_Monitor_Update

Icon Event E.png

Force_Monitor_Update

On Response
None
Off Response
None
Parameters

Give_Item_To_Player

Icon Event E.png

Give_Item_To_Player

This Event will make the player pick up a specific item. Items are normally automatically picked up by the player when he gets close enough to them. All game items are specified in items.tbl.
On Response
Give the player the specified item.
Off Response
None
Parameters
Item: Item class name, which is selectable from a drop-down list of all items from items.tbl.

Go_Undercover

Icon Event E.png

Go_Undercover

On Response
None
Off Response
None
Parameters

Heal

Icon Event E.png

Heal

This event adds or subtracts from the health of all linked objects.
On Response
Apply the Life Delta specified in this event's properties to all linked objects.
Off Response
None
Parameters
Life Delta: Modification to perform to life. Negative values subtract life, positive values add life.
Apply to player: If ticked, apply the Life Delta to the player as the On response, rather than applying it to linked objects.

Ignite_Entity

Icon Event E.png

Ignite_Entity

On Response
None
Off Response
None
Parameters

Make_Fly

Icon Event E.png

Make_Fly

This Event will make the linked AI enter fly mode. If the AI is already flying, this Event does nothing. This Event can only make AI fly if it normally has the ability (i.e., this Event can’t make a Cave Slug fly).
On Response
Make linked AI enter fly mode.
Off Response
None
Parameters

Make_Invulnerable

Icon Event E.png

Make_Invulnerable

This event is used to toggle the invulnerability state of linked objects. By default, all objects are vulnerable.
On Response
Set all linked objects to invulnerable for the duration specified in the event properties.
Off Response
Set all linked objects to vulnerable (ie. revert the effect of any previously applied Make_Invulnerable events)
Parameters
Duration: Specify a duration for the invulnerability. If 0, invulnerability lasts indefinitely.

Make_Walk

Icon Event E.png

Make_Walk

This Event will make the linked AI enter walk mode. If the AI is already walking, this Event does nothing. This Event can only make AI walk if it normally has the ability (i.e., this Event can’t make a Grabber walk).
On Response
Make linked AI enter walk mode.
Off Response
None
Parameters

Modify_Rotating_Mover

Icon Event E.png

Modify_Rotating_Mover

Speed up or slow down the movement of all linked rotating movers.
On Response
Apply the modification specified in the event properties to all linked rotating movers.
Off Response
None
Parameters
Settings: Configure settings to increase or decrease all linked rotating movers by the percentage specified.

Mover_Pause

Icon Event E.png

Mover_Pause

This event toggles the active state of linked movers.
On Response
Immediately pause all linked movers at their current position.
Off Response
Resume the movement of all linked movers (ie. revert the effect of a previously applied Mover_Pause)
Parameters

Particle_State

Icon Event E.png

Particle_State

This event is used to toggle the active state of linked particle emitters. The default state for particle emitters is controlled by the "Emitter is initially on" flag in the emitter properties.
On Response
Set all linked particle emitters to active/enabled.
Off Response
Set all linked particle emitters to inactive/disabled.
Parameters

Push_Region_State

Icon Event E.png

Push_Region_State

This event is used to toggle the active state of linked push regions. The default state for push regions is active/enabled.
On Response
Set all linked push regions to active/enabled.
Off Response
Set all linked push regions to inactive/disabled.
Parameters

Reverse_Mover

Icon Event E.png

Reverse_Mover

This event is used to immediately reverse the direction in which linked movers are currently moving. This event is linked to a keyframe object.
On Response
Reverse the direction of all linked movers that meet the condition specified in the event parameters.
Off Response
None
Parameters
If Moving: Specify the directional condition for the application of the event. ie. This event will only take effect if the linked mover is moving in the specified direction when the event receives an On message.

Set_Gravity

Icon Event E.png

Set_Gravity

Set the downward acceleration due to gravity applied to all objects in the world.
On Response
Override the default gravity (-9.8 m/s^2) with the value specified in the event properties.
Off Response
None
Parameters
Gravity: Value for acceleration due to gravity, specified in m/s^2, and applied in the Y axis.

Set_Liquid_Depth

Icon Event E.png

Set_Liquid_Depth

Linearly transition the liquid depth of the linked Room Effect object to a specified new depth over time.
On Response
Begin transitioning liquid depth according to settings configured in properties.
Off Response
None
Parameters
Depth: Set the desired depth after the transition has completed.
Time: How long in seconds it takes the liquid depth to transition to the event-configured depth from the configured depth value in the properties of the linked Room Effect.

Shake_Player

Icon Event E.png

Shake_Player

This Event will shake the viewpoint of the Player.
On Response
Start shaking the Player camera.
Off Response
None
Parameters
Magnitude: How strong to make the shaking. This value is the max amplitude of the shake in meters.
Time: How long to shake the camera in seconds.

Skybox_State

Icon Event E.png

Skybox_State

Can be used to rotate the skybox around the camera.
On Response
Start rotating as per values specified in the event properties. Rotation is always from -360 to 360, then loops.
Off Response
None
Parameters
Axis: Axis to rotate the skybox around
Velocity: Velocity/speed of the rotation, specified in degrees-per-second (degrees/sec).

Strip_Player_Weapons

Icon Event E.png

Strip_Player_Weapons

Used to remove weapons from the player's inventory.
On Response
Remove all weapons and ammo the player currently has.
Off Response
None
Parameters

Switch_Model

Icon Event E.png

Switch_Model

This Event will change the model of all linked objects to the model filename that is contained in the Event.
On Response
Change the model.
Off Response
None
Parameters
Model filename: Disk filename (with extension) of the model to switch to.

Teleport

Icon Event E.png

Teleport

This Event will teleport all linked objects to the Event location. There are no special effects associated with the teleportation.
On Response
Teleport all linked objects.
Off Response
None
Parameters

Teleport_Player

Icon Event E.png

Teleport_Player

Teleports the player. This is the only event for which pitch/yaw is relevant, so the event displays a small red arrow showing you which direction it is facing.
On Response
Teleport the player to the event, setting their position (xyz) and rotation (pitch/yaw) to that of the Teleport_Player event.
Off Response
None
Parameters

Turn_Off_Physics

Icon Event E.png

Turn_Off_Physics

This event controls whether linked entities have physics applied. Typically, this event is used alongside Detach to move entities via cranes or similar. Physics is enabled by default.
On Response
Turn off physics for all linked entities.
Off Response
Turn on physics for all linked entities.
Parameters

Unhide

Icon Event E.png

Unhide

Toggle visibility of linked object(s). Note that if this event is used to unhide an entity, the entity will not be "unhidden" until the next time its' root bone is out of the player's line of sight. Because of this, you will normally want to be sure to send an on message to an unhide event at a time the linked entity is out of the player's view.
On Response
Unhide all linked objects.
Off Response
Hide all linked objects.
Parameters

Special

Activate_Capek_Shield

Icon Event E.png

Activate_Capek_Shield

On Response
None
Off Response
None
Parameters

Countdown_Begin

Icon Event E.png

Countdown_Begin

On Response
None
Off Response
None
Parameters

Countdown_End

Icon Event E.png

Countdown_End

On Response
None
Off Response
None
Parameters

Defuse_Nuke

Icon Event E.png

Defuse_Nuke

On Response
None
Off Response
None
Parameters

Display_Fullscreen_Image

Icon Event E.png

Display_Fullscreen_Image

Displays a specified image/texture filename stretched to the player's window resolution. Note that Dash Faction is required for alpha channels on fullscreen images to function correctly.
On Response
Display the specified filename as a fullscreen image.
Off Response
Stop displaying the fullscreen image.
Parameters
Filename: Image to display (normally .tga or .vbm). It's very important to ensure the data in this field is correct - a Display_Fullscreen_Image event that receives an on message but has no valid filename specified will result in an unrecoverable error (crash).

Fire_Weapon_No_Anim

Icon Event E.png

Fire_Weapon_No_Anim

On Response
None
Off Response
None
Parameters

Never_Leave_Vehicle

Icon Event E.png

Never_Leave_Vehicle

On Response
None
Off Response
None
Parameters

Win_PS2_Demo

Icon Event E.png

Win_PS2_Demo

On Response
None
Off Response
None
Parameters

Deprecated

  • The below events are not readily accessible via the Events section of Object Mode, but are referenced in events.tbl and/or RED documentation.

Follow_Player

Icon Event E.png

Follow_Player

This Event will force all linked objects to follow and protect the Player. This should only be used to make Hendrix follow (or stop following) the Player.
On Response
Make linked entities follow the Player.
Off Response
Make linked entities stop following the Player.
Parameters
No additional parameters.

Level_Transition_Marker

Icon Event E.png

Level_Transition_Marker

This is a special type of Event which doesn’t respond to On or Off messages. This Event is used to maintain the correct positions and orientations off all objects in the transition areas between levels. This Event needs to be placed in the location of the trigger which causes level loading in the other level involved in the transition.
On Response
None
Off Response
None
Parameters
No additional parameters.

Set_Light_State

Icon Event E.png

Set_Light_State

This Event will set the state of any linked lights. Currently this event can set a light on or off, but any light related changes (like making a light flash, change color, etc.) can be data within this event.
On Response
Change the state of all linked lights.
Off Response
None
Parameters
State: On or Off

Shield

Icon Event E.png

Shield

This Event will add the Shield Delta value to the shield of all linked objects. (this event was likely replaced by Armor)
On Response
Add Shield Delta to all linked objects shields.
Off Response
None
Parameters
Shield Delta: The amount of shield to add (you can decrease shield by using a negative number here).